CeraVe Foaming Facial Cleanser is the 355 ml pump that turns up in almost every dermatologist-recommended routine on the internet, and for oily and combination skin in this climate it is a genuinely good fit — better suited to Dhaka than most of CeraVe’s range. It is also the one CeraVe product with something on the ingredient list that a lot of Bangladeshi customers actively avoid. We put that near the top of this page rather than burying it.

What CeraVe Foaming Facial Cleanser actually is

CeraVe Foaming Facial Cleanser is a clear gel that foams, built for normal to oily skin, sold here in the 355 ml pump — the value size. The formula pairs a mild surfactant system with three skin-identical ceramides, niacinamide and hyaluronic acid, so it cleanses without the tight, squeaky, stripped feeling that cheap foaming washes leave behind.

That combination is the whole pitch for CeraVe Foaming Facial Cleanser. Most gel cleansers that genuinely remove oil also remove barrier lipids. CeraVe Foaming Facial Cleanser puts some back on the way out. Whether it fully compensates is debatable, but the intent is sound and the formula supports it.

CeraVe also sells a Hydrating Cleanser for dry skin and an Air Foam Cleanser for combination and sensitive skin. Buying the wrong one is the most common mistake in this range, and there is a section further down to stop you making it.

The full ingredient list

CeraVe Foaming Facial Cleanser has twenty-four ingredients, taken from the panel printed on the bottle (formula code 20215006V01) and cross-checked against CeraVe’s own site:

Aqua/Water/Eau, Cocamidopropyl Hydroxysultaine, Glycerin, Sodium Lauroyl Sarcosinate, PEG-150 Pentaerythrityl Tetrastearate, Niacinamide, PEG-6 Caprylic/Capric Glycerides, Sodium Methyl Cocoyl Taurate, Propylene Glycol, Ceramide NP, Ceramide AP, Ceramide EOP, Carbomer, Methylparaben, Sodium Chloride, Sodium Lauroyl Lactylate, Cholesterol, Disodium EDTA, Propylparaben, Citric Acid, Tetrasodium EDTA, Hydrolyzed Hyaluronic Acid, Phytosphingosine, Xanthan Gum.

It contains parabens — and we are not going to skip past that

Methylparaben sits fourteenth and Propylparaben nineteenth. CeraVe Foaming Facial Cleanser is one of the few products left in the CeraVe line-up that still uses them, and in a market where “paraben-free” is printed on half the shelf, you deserve to know before you order rather than after.

The fair context: parabens are among the most-studied preservatives in cosmetics. Methylparaben and propylparaben are both permitted in the EU, the US, Japan and Korea, at limits well above the levels used in a rinse-off cleanser. The concern that made them unpopular came from studies at doses far beyond cosmetic use, and no regulator has banned these two. A cleanser is also on your skin for thirty seconds before it goes down the drain.

So this is not a warning. It is a fact you should have. If you avoid parabens on principle — and plenty of people do, which is their right — then CeraVe Foaming Facial Cleanser is not your cleanser, and we would rather tell you now than have you read the bottle at home.

The surfactant system is the good part

Look at what is not in CeraVe Foaming Facial Cleanser: no Sodium Lauryl Sulfate, no Sodium Laureth Sulfate, no soap. The cleansing comes from Cocamidopropyl Hydroxysultaine, Sodium Lauroyl Sarcosinate and Sodium Methyl Cocoyl Taurate — three mild surfactants that clean well without the harsh degreasing of a sulfate system.

One honest footnote: cocamidopropyl derivatives are a recognised contact allergen for a small minority of people, usually those who already react to cocamidopropyl betaine in shampoos. If that is you, patch test. For everyone else this is about as gentle as a genuinely foaming cleanser gets.

Niacinamide, ceramides and hyaluronic acid

In CeraVe Foaming Facial Cleanser, niacinamide sits sixth, which is a meaningful position for an active in a rinse-off product — though no percentage is published, and anyone quoting you one is guessing. The three ceramides (NP, AP, EOP) and Hydrolyzed Hyaluronic Acid sit lower, as you would expect, alongside cholesterol and phytosphingosine.

Be realistic about what actives do in a cleanser. Thirty seconds of contact then rinsed away is not the same as a leave-on serum. They soften the strip rather than treating anything. That is still worth having, and it is why CeraVe Foaming Facial Cleanser does not leave the tight feeling most foaming washes do.

CeraVe Foaming Facial Cleanser three essential ceramides, niacinamide and hyaluronic acid — The three ceramides plus niacinamide are what separate this from an ordinary foaming gel.

The claims, and what is behind them

“12-hour oil control.” A brand claim from CeraVe’s own site. No study is published against it that we could find, and no methodology is given. Treat it as a positioning statement rather than a measured result.
“97% agree skin felt healthy after use.” This is a consumer-perception figure — people were asked how their skin felt, and 97% agreed. It is not a clinical measurement of skin health. Useful, but it measures opinion.
“Fragrance-free.” This one is verifiable straight from the list above. No parfum, no fragrance, no masking agent. Real.
“Non-comedogenic” and “allergy-tested.” Both standard cosmetic testing claims, both printed on the pack.
“No harsh microbeads.” True, and slightly beside the point in 2026 — microbeads are banned in most markets anyway.

Where a brand publishes a number we quote the number. Where a brand publishes a feeling, we say it is a feeling.

CeraVe Foaming Facial Cleanser: no harsh microbeads, allergy-tested, non-comedogenic, fragrance-free — The claim set printed on the pack. Fragrance-free is the one you can check yourself.

How CeraVe Foaming Facial Cleanser behaves in Bangladesh

Unlike most of the CeraVe range, CeraVe Foaming Facial Cleanser is genuinely well matched to the climate here.

Dhaka humidity plus heat means most people produce more sebum than the same skin would in a dry country. A gel that foams and rinses clean is exactly right for that, where a cream cleanser would feel like it left a film. If you have oily or combination skin, CeraVe Foaming Facial Cleanser will probably feel better to you in July than any cream cleanser on this site.

Two local caveats worth knowing:

Hard water. Much of Dhaka’s supply is hard, and hard water reduces how well surfactants rinse and can leave a mineral residue that feels like tightness. If your skin feels tight after cleansing and you have blamed the product, the water may be the culprit. A final rinse with filtered or boiled-and-cooled water is a cheap test.
Twice a day is enough. In heat there is a temptation to wash four or five times. Over-cleansing is the fastest way to trigger the rebound oiliness people then buy more cleanser to fix. Morning and night, and rinse with plain water in between if you need to.

For dry or dehydrated skin, or during a cool, dry January, this is the wrong cleanser and the Hydrating Cleanser is the right one.

How to use it

The direction on CeraVe Foaming Facial Cleanser is three steps: wet skin with lukewarm water, massage the cleanser in gentle circular motions as it foams, rinse well and pat dry.

What actually matters:

Lukewarm, not hot. Hot water strips more than any cleanser in this price range will.
One to two pumps for a face. The 355 ml bottle encourages overuse simply because it is large.
Thirty to sixty seconds of contact. Longer does not clean better; it just dries you out.
Second cleanse only. If you wear sunscreen or makeup, use an oil or micellar water first. CeraVe Foaming Facial Cleanser is a water-based gel and water does not dissolve sunscreen filters well.
Pat, do not rub. And moisturise while the skin is still slightly damp.

CeraVe Foaming Facial Cleanser full ingredient panel including the parabens — The panel from the bottle. Methylparaben is fourteenth, propylparaben nineteenth — read it yourself.

Which CeraVe cleanser is actually yours

This is the question we get asked more than any other, so here is the short version of where CeraVe Foaming Facial Cleanser sits.

CeraVe Foaming Facial Cleanser — normal to oily skin. Clear gel that foams. Oil control is the key benefit. This one.
CeraVe Hydrating Cleanser — normal to dry skin. Non-foaming, milky, leaves a slight cushion. If your skin feels tight after washing, this is your cleanser.
CeraVe Air Foam Cleanser — combination to sensitive skin. Dispenses as instant foam, sits between the other two on oil control and adds more hydration.
CeraVe SA Cleansers — for texture, bumps and clogged pores, with salicylic acid doing work a plain cleanser cannot.

If you are oily in summer and dry in winter, owning the foaming and the hydrating versions and switching by season is not excessive. It is what most people with combination skin end up doing anyway.

CeraVe Foaming Facial Cleanser compared with the CeraVe Air Foam Cleanser — CeraVe compares the two directly: skin type, key benefit and texture.

Who should skip it

Not for you if: your skin is dry, dehydrated or tight — buy the Hydrating Cleanser; you avoid parabens; you react to cocamidopropyl compounds; you want a cleanser that also treats acne, in which case a salicylic acid cleanser does more; or you were hoping for something that removes waterproof makeup on its own, which no water-based gel does well.

Good for you if: your skin is oily or combination; you want a large, honest, fragrance-free daily cleanser that will last months; you use actives and want a cleansing step that will not add to the irritation; or you have simply been using a soap bar or a harsh face wash and want to stop.

What CeraVe does not publish

No niacinamide percentage. None, anywhere, in any market.
No ceramide percentages.
No pH figure is published for CeraVe Foaming Facial Cleanser, which is a shame — pH is genuinely useful information for a cleanser and the brand could publish it.
No study behind the 12-hour oil control claim that we could locate.
No period-after-opening or country of manufacture on the brand page. The bottle you receive carries the country statement; read it.

Everything above is checkable on CeraVe’s own product page, including the ingredient list and the claims. We would rather you verified than took our word for it.

Questions we get asked

Will CeraVe Foaming Facial Cleanser dry out my skin?

If your skin is oily, almost certainly not — that is what it is designed for. If your skin is normal-to-dry, it may, and the Hydrating Cleanser is the better buy. If it dries you out in winter but suits you in summer, that is completely normal and worth switching seasonally.

Does it remove sunscreen?

Partly, not reliably. Modern sunscreen filters are oil-soluble, and CeraVe Foaming Facial Cleanser is water-based. Use a cleansing oil, balm or micellar water first, then this as your second cleanse.

Is it good for acne?

CeraVe Foaming Facial Cleanser is a good supporting cleanser for acne-prone skin — mild, non-comedogenic and fragrance-free — but it treats nothing. Acne needs an active. This is what you use so the active does not wreck your barrier.

How long does 355 ml last?

At two pumps twice a day, a 355 ml bottle of CeraVe Foaming Facial Cleanser lasts four to six months for one person. It is the best value size CeraVe sells and the main reason to buy it over the smaller bottles.

Can I use it on my body?

You can, but it is expensive per millilitre for body use and a dedicated body wash will do the job for less.

Is it safe in pregnancy?

Nothing in CeraVe Foaming Facial Cleanser is a recognised pregnancy concern — no retinoids, no salicylic acid, no essential oils. As always, check with your doctor rather than a shop.

Why is it cheaper abroad?

Because CeraVe Foaming Facial Cleanser is an imported product carrying freight, duty and a small retailer margin. We would rather be straight about that than pretend the price is anything other than what importing costs.

Why the 355 ml is the size worth buying

CeraVe sells this cleanser in 87 ml, 236 ml, 237 ml, 355 ml and 473 ml depending on market. The 355 ml pump is the sweet spot for one simple reason: cost per millilitre drops sharply between the small bottles and this one, and 355 ml is still a quantity you will finish inside six months rather than watching it sit half-used for two years.

The pump matters more than people expect. A pump dispenses a consistent dose, keeps your fingers out of the product, and does not tip over in a wet bathroom the way a flip-cap does. On a bottle this size you will use it roughly seven hundred times, so the mechanism is not a trivial detail.

One practical note: the pump on CeraVe Foaming Facial Cleanser has a locking collar. Twist it closed before travelling or it will empty itself into your bag. Every one of us has learned that the expensive way.

Authenticity, storage and what to check when it arrives

CeraVe is one of the most counterfeited skincare brands in South Asia, because the packaging is simple and the volume is high. We photograph the bottle we sell — front, back and the ingredient panel — so you can hold what arrives against what is on this page.

Four things worth checking on any bottle of CeraVe Foaming Facial Cleanser you buy anywhere, from us or from anyone else:

The formula code. Ours reads 20215006V01 on the ingredient panel. A genuine bottle has a code; a fake often does not, or prints one that does not match the panel.
The texture. A clear, slightly viscous gel that foams when you add water. If it is cloudy, watery, or foams instantly out of the bottle, something is wrong.
The smell. Essentially nothing. It is fragrance-free. If it smells of anything at all, do not use it.
The pump action. Smooth and consistent. Fakes frequently reuse cheap pumps that stick.

On storage: keep it out of direct sun and away from the heat of a geyser. CeraVe Foaming Facial Cleanser is water-based and preserved, so it is stable, but heat still shortens the life of any cosmetic. If anything about the bottle you receive does not match this page, tell us and we will replace it — that offer is easier to make when you have published the ingredient panel yourself.

Where it fits in your routine

Cleanse, treat, moisturise, protect. CeraVe Foaming Facial Cleanser is step one, and step one sets the tone for everything after it — a stripping cleanser makes every subsequent product work harder.

Follow it with the Anua BHA 2% Gentle Exfoliating Toner if you are treating congestion, seal with CeraVe Moisturizing Cream if your skin is dry underneath the oil, keep Cicaplast Baume B5+ for the days you overdo it, and finish every morning with sunscreen — our CeraVe Ultra-Light SPF 30 is the matching one from the same brand. The full cleansers range is worth a look if you are not sure this is your skin type.

Buying CeraVe Foaming Facial Cleanser in Bangladesh

We import the 355 ml CeraVe Foaming Facial Cleanser pump and photograph the bottle we sell, ingredient panel included, so you can check what arrives against what we advertised. Store it out of direct sun and keep the pump clean.

If you are not sure whether you are oily enough for this or dry enough for the Hydrating version, message us and describe how your skin feels twenty minutes after washing. That one answer usually settles it, and we would rather sell you the right bottle once than the wrong bottle twice.

CeraVe cleanser Bangladesh

CeraVe Foaming Facial Cleanser 355ml